– 28 –

SECURITY CODES Vista 15/20 (Honeywell)

To Add a User or

Change a User's

Code

Changing the Master

Code

Follow the procedure

for changing a user's

code, but enter user

#02; enter the new

code a second time to

confirm accuracy.

WAIT for keypad beep

before continuing!

Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how to

use any system function they do not need to know, such as bypassing protection zones for example.

Sequential key depressions for all steps in a procedure must be made within 2

seconds of one another, or else the entire entry is aborted and must be repeated from

its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).

CODE

1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY

(Master Code) Example: 7 2 9 6 then press the CODE key.

2. ENTER USER NUMBER

(User Number) Enter the 2-digit User Number (03-16) for the user you

are adding or changing.

3. ENTER USER'S CODE

(User's Code) Enter the new 4-digit security code for that user.

CODE

To Delete a User 1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY

(Master Code) Example: 7 2 9 6 then press the CODE key.

2. ENTER USER NUMBER

(User Number) Enter the 2-digit User Number (03-16) for the user

whose code you are deleting.

3. ----------- STOP

Wait (about 3 seconds) until the keypad beeps once

before pressing any other key. The code is

automatically deleted.